chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Metal Collar Quick Connect Fitting Service|Page 6675 > < Procedures|Page 6670
Page 1
background image

Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service

Metal Collar Quick Connect Fitting Service

Special Tools

J-41769 - Fuel Line Quick Disconnect Tool

Disconnect Procedure

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027)   (See: Fuel Filter/Fuel Pressure Release/Service and

Repair/Fuel Pressure Relief (Without CH 48027))Fuel Pressure Relief (With CH 48027)   (See: Fuel Filter/Fuel Pressure Release/Service and
Repair/Fuel Pressure Relief (With CH 48027)) .

2. Remove the fuel line retainer.

Warning

Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.

3. Using compressed air, blow any dirt or debris from around the connection.

4. Using the correct tool from the J-41769 - tool , insert the tool into the female connector end, then push inward in order to release the quick connect

locking tabs.

Metal Collar Quick Connect Fitting Service|Page 6675 > < Procedures|Page 6670