Silverado 1500 4WD V8-6.0L Hybrid (2009)
11. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
12. Install the fuel line clip to the bracket on the automatic transmission.
13. Install the fuel pipe bracket nut to the bellhousing stud and tighten the nut to 25 Nm
(18 lb ft) .
14. Position and install the front propeller shaft, if required. Refer to Front Propeller Shaft Replacement (See: Transmission and
Drivetrain/Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Front Propeller Shaft Replacement) .
15. Lower the vehicle.