Silverado 1500 4WD V8-6.0L Hybrid (2009)
Ensure that the outer bearing assembly rotates freely in the hub
5. Using the J 24426 - installer (2) and the J 8092 - handle (1), turn the wheel hub over and seat the outer bearing assembly against the retaining ring.
6. Turn the wheel hub over and install the inner bearing cup.
7. Using the J 24427 - installer (2) and the J 8092 - handle (1), install the inner bearing cup into the wheel hub.
8. Install the inner bearing.
Note
Ensure the seal is fully seated in the hub bore.