Silverado 1500 4WD V8-6.0L VIN U (2006)
13. Important: o Ensure the oil cooler line being installed has a plastic cap on the end that connects to the quick connect fitting. If no plastic cap
exists, or the plastic cap is damaged, obtain a new cap. Install the cap onto the cooler line prior cooler line installation.
^
Do not use the plastic cap in order to install the cooler line into the fitting.
If equipped with a 8.1L engine perform the following:
14. Install the oil cooler hoses to the clip.
15. If equipped with a 5.3L or 6.0L engine, perform the following:
0. Install the oil cooler hoses to the hose clip on the fan shroud.
1. Snap the oil cooler hose clip shut.
16. Connect the engine oil cooler quick connect fittings.
