Silverado 1500 4WD V8-6.2L (2010)
Coolant Line/Hose: Service and Repair
Engine Coolant Air Bleed Pipe Replacement (with AFM)
Engine Coolant Air Bleed Pipe Replacement (with AFM)
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair).
2. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) (See: Service and Repair)Cooling System Draining and
Filling (Static Fill) (See: Service and Repair).
3. Reposition the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
4. Remove the radiator vent inlet hose (2) from the coolant air bleed pipe fitting.
5. Remove the coolant air bleed pipe bolts (309) (intake manifold shown removed for clarity).
6. Remove the coolant air bleed pipe (307) and seals (308).
