Silverado 1500 4WD V8-6.2L (2010)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement (With out AFM)
Valve Lifter Replacement (With out AFM)
Removal Procedure
1. Remove the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side (See: Cylinder Head Assembly/Service and
Repair/Cylinder Head Replacement) or Cylinder Head Replacement - Right Side (See: Cylinder Head Assembly/Service and Repair/Cylinder
Head Replacement).
2. Remove the valve lifter guide bolts (211).
3. Remove the valve lifter guides (210) with the lifters. Note the installed position of the guides. The notched area of the guides is to align with the
locating tab on the engine block.
4. Remove the valve lifters (209) from the guide (210).