Silverado 1500 4WD V8-6.2L (2010)
1. Install the power steering gear outlet hose (1) to the vehicle.
2. Connect the power steering gear outlet hose (2) to the steering gear (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Compress the power steering gear outlet hose clamp (2).
4. Connect the power steering gear outlet hose (1) to the power steering pump assembly (3).
Tighten the fitting to 32 Nm (24 lb ft).
5. Clean any excessive power steering fluid from the vehicle and remove the drain pans.
6. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power
Steering/Power Steering Bleeding/Service and Repair).
Power Brake Booster Inlet Hose Replacement
