Silverado 1500 4WD V8-6.2L (2010)
1. Position the generator bracket to the engine.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the generator bracket bolts.
Tighten the bolts to 50 Nm (37 lb ft).
3. Position the engine wiring harness clip (1) to the generator bracket and install the engine harness clip bolt (3).
Tighten the bolt to 9 Nm (80 lb in).
4. Install the power steering pump. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) (See: Steering and
Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair)Power Steering Pump Replacement (4.3L) (See: Steering and
Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair)Power Steering Pump Replacement (6.6L) (See: Steering and
Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair).
5. Install the generator. Refer to Generator Replacement (V6) (See: )Generator Replacement (V8) (See: )Generator Replacement (6.6L) (See: ).
