Silverado 1500 4WD V8-6.2L (2010)
1. Install the generator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the generator bolts.
Tighten the bolts to 55 Nm (41 lb ft).
3. Install the generator battery jumper cable terminal (1) to the generator stud.
4. Install the generator battery jumper cable nut (2) to the generator.
Tighten the nut to 9 Nm (80 lb in).
5. Position the generator battery jumper cable boot (3).
