chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Suspension Strut / Shock Absorber > < Stabilizer Link|Service and Repair
Page 1
background image

Shackle: Service and Repair

Rear Spring Shackle Replacement (1500 Series)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle   (See: Wheels and Tires/Vehicle Lifting/Service and Repair).

2. Remove the leaf spring assembly from vehicle. Refer to Leaf Spring Replacement   (See: Service and Repair/Rear Suspension Leaf Spring).
3. Remove the shackle nut and the bolt from the spring.

Installation Procedure

1. Install the shackle to the spring.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Install the shackle nut and bolt to the spring.

Tighten the shackle nuts to 95 Nm (70 lb ft).

3. Install the leaf spring assembly to the vehicle. Refer to Leaf Spring Replacement   (See: Service and Repair/Rear Suspension Leaf Spring). 
4. Remove the safety stands.
5. Lower the vehicle.

Suspension Strut / Shock Absorber > < Stabilizer Link|Service and Repair