Silverado 1500 4WD V8-6.2L (2010)
Note: Step 7 is for those vehicles that have the yoke attached to the output shaft.
7. Reference mark the transmission or transfer case (1), output shaft flange (2), universal joint bearing cap (3), and the propeller shaft.
8. Remove the center bearing support nuts (1).
9. Remove the center bearing support (2).
Note: For those vehicles equipped with the yoke attached to the output shaft, proceed to step 10. Those vehicles equipped with a slip yoke,
proceed to step 12.
10. For vehicles equipped with the yoke attached to the output shaft, use a suitable jack stand support the propeller shaft until propeller shaft is to be
removed.
