Silverado 1500 4WD V8-6.2L (2010)
7. Using the J 2222-C - wrench , remove the rear wheel bearing adjuster nut.
Note: If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool.
8. Remove the rear axle hub from the axle housing.
9. Remove the rear brake rotor, if necessary. Refer to Rear Brake Rotor Replacement (JD9) (See: Brakes and Traction Control/Disc Brake
System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JD9))Rear Brake Rotor Replacement (JH6) (See: Brakes and
Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JH6))Rear Brake Rotor Replacement
(JH7) (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Rear Brake Rotor Replacement (JH7)) Rear
Brake Rotor Replacement.
10. Using a suitable seal removal tool, remove the oil seal from the wheel hub.
11. Remove the inner hub bearing.
