Silverado 2500 2WD V8-6.0L VIN U (2004)
Cellular Phone Microphone: Service and Repair
MICROPHONE REPLACEMENT - RADIO VOLUME COMPENSATOR INTERIOR
REMOVAL PROCEDURE
1. Remove the floor console bezel.
2. Remove the floor console cupholder.
3. Remove the floor console storage bin.
4. Remove the floor console end panel.
5. Move the drivers seat fully forward.
6. Reposition the inboard seat track trim (1) in order to gain access to the rear console side panel screw (2).
7. Remove the rear console side panel screw.
8. Move the drivers seat to the fully rearward.
9. Remove the front console side panel screw (1).
IMPORTANT: The floor console drivers side trim panel can not be removed until the noise compensation microphone electrical connector hold
down clip is released from the console.
10. Carefully pull outward on the trim panel to release the trim panel clips.