Silverado 2500 2WD V8-6.0L VIN U (2004)
Seat Cushion: Procedures
Seat Cushion Frame Replacement - Front
SEAT CUSHION FRAME REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the seat trim panel.
2. Remove the seat cushion trim cover and pad.
3. Remove the following components from the seat cushion frame:
-
The frame springs (1)
-
The frame suspension (2)
-
The plastic retainers (3)
4. Remove the seat cushion frame from the vehicle.
INSTALLATION PROCEDURE
1. Install the following components to the seat cushion frame:
-
The plastic retainers (3)
-
The frame suspension (2)
-
The frame springs (1)
2. Install the seat cushion trim cover and pad.
3. Install the seat trim panel.
4. Re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Rezeroing Procedure in Restraint Systems.
Seat Cushion Cover and Pad Replacement - Rear
SEAT CUSHION COVER AND PAD REPLACEMENT - REAR
REMOVAL PROCEDURE