Silverado 2500 2WD V8-6.0L VIN U (2004)
6. If necessary, remove the engine sight shield.
7. Unsnap the junction block cover.
8. Remove the positive battery cable (1) from the junction block.
9. If equipped with a 4.8L, 5.3L, or 6.0L engine, remove the negative cable clip from the positive cable clip.
10. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
11. If equipped with a 8.1L engine, remove the negative cable clip from the positive cable clip.
12. Raise and suitably support the vehicle. Refer to Vehicle Lifting.