Silverado 2500 2WD V8-8.1L VIN G (2005)
Removal Procedure
1. Remove the rear seat, if necessary.
2. Remove the rear window molding.
3. Remove the armrest screw.
4. Remove the armrest.
5. Remove the sill trim plates.
6. Remove the quarter panel trim screws.
7. Pull the panel out, and remove the seat belt assembly. Refer to Seat Belt Retractor Replacement - Rear (Extended Cab) Seat Belt Retractor
Replacement - Rear (Crew Cab) in Seat Belts.
8. Remove the quarter panel from the vehicle.
Installation Procedure
1. Install the seat belt assembly.
2. Install the quarter panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the quarter panel trim screws.
