chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Brake Bleeding > < Brakes - Low Speed ABS Activation/No DTC's Set|Page 7553
Page 4
background image

9. Connect the WSS cable electrical connector.

10. Install the brake rotor (2) shown on the 1500 Series.
11. Install the tire and wheel.
12. Perform the Diagnostic System Check - Vehicle in Vehicle DTC Information.  See: Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnostic System Check - Vehicle  

Brake Bleeding > < Brakes - Low Speed ABS Activation/No DTC's Set|Page 7553