Silverado 2500 2WD V8-8.1L VIN G (2005)
6. Adjust the park brake.
w/Rear Disc w/o RPO NYS
Park Brake Cable Replacement - Right Rear (w/Rear Disc w/o RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. Release the park brake.
4. Raise and support the vehicle.
5. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and
removing the right park brake cable from the equalizer bar.
6. For 25/35 series vehicles, disable the park brake cable automatic adjuster.
7. For 25/35 series vehicles, disconnect the cable at the equalizer.