Silverado 2500 2WD V8-8.1L VIN G (2005)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement - Right
Exhaust Manifold Replacement - Right (8.1L Engine)
Removal Procedure
1. Remove the wheelhouse panel.
2. Remove the oil level indicator.
Important: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug or
the wire could be damaged.
3. Remove the spark plug wires from the spark plugs and ignition coils.
4. Remove the spark plugs.
5. Raise and suitably support the vehicle.
6. Remove the exhaust manifold heat shield bolts and nuts.
7. Remove the exhaust manifold heat shield.
8. Lower the vehicle.
