Silverado 2500 2WD V8-8.1L VIN G (2005)
Wheel Bearing: Service and Repair
With Rear Wheel Steering
Wheel Hub and Bearing Replacement
^
Tools Required
-
J 45859 Axle Remover
Removal Procedure
1. Notice:
Refer vehicle Lifting.
Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor.
4. Remove the axle nut dust cover (4).
5. Remove the cotter pin (2) and retainer (3) from the wheel drive shaft nut.
6. Remove the wheel drive shaft retaining nut.
7. Remove the wheel hub and bearing retaining bolts.