Silverado 2500 2WD V8-8.1L VIN G (2005)
Band Control Solenoid Valve: Service and Repair
Control Valve Solenoid Replacement (Solenoid C, D, E, F, G)
Control Valve Solenoid Replacement (Solenoid C, D, E, F, G)
Removal Procedure
1. Remove the oil pan and suction filter.
2. Disconnect the internal wiring harness from the solenoid being changed.
3. Remove the solenoid retainer (1) for the C solenoid (3). Note the position of the solenoid connector and pull the solenoid (3) out of the bore in the
control valve assembly. The O-rings (2) and (4) provide the resistance felt during removal.
4. Remove the solenoid retainers (6) for the D solenoid (1), E solenoid (4), F solenoid or solenoid (8), whichever is being replaced.
5. Note the position of the solenoid connector and pull the solenoid out of the bore in the control valve assembly. The O-rings (2) and (3) provide the
resistance felt during removal.
Installation Procedure
