Silverado 2500 2WD V8-8.1L VIN G (2005)
1. Obtain a new D solenoid (1), E solenoid (4), F solenoid (1), or G solenoid (8). Install O-rings (2) and (3) and lubricate with clean transmission
fluid. Push the new solenoid into the control valve assembly (5) with the wiring harness connector in the correct position.
2. Reinstall the solenoid retainer (6). Reconnect the internal wiring harness to the solenoid(s) replaced.
3. For new C solenoid (3), install O-rings (2) and (4) and lubricate with clean transmission fluid. Push the new C solenoid (3) into the control valve
assembly with the wiring harness connector in the correct position. Reinstall the solenoid retainer (1).
4. Install the oil pan and suction filter.