Silverado 2500 2WD V8-8.1L VIN G (2005)
Pinion Bearing: Service and Repair
Drive Pinion Bearings Replacement (10.5 Inch Axle)
Rear Differential
Drive Pinion Bearings Replacement (10.5 Inch Axle)
^
Tools Required
-
J 22388 Pinion Oil Seal Installer - Rear
-
J 22761 Differential Side Bearing Installer
-
J 22912-01 Split Plate Bearing Puller
-
J 24433 Pinion Cone and Side Bearing Installer
-
J 37624 Pinon Bearing Installer
-
J 8092 Universal Driver Handle - ¾ in - 10
-
J 8608 Rear Pinion Bearing Installer
-
J 8614-01 Flange and Pulley Holding Tool
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the differential assembly.
3. Remove the pinion gear bearing retainer.
4. Remove the pinion yoke and the oil seal.
5. Remove the outer pinion bearing.
6. Remove the pinion.
7. Remove the collapsible spacer.