Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
7. Disconnect the rear sunroof drain hoses from the drain spigot.
8. Remove the front to bolts located at the motor base first.
9. With the aid of an assistant, remove the remaining bolts (1) that secure the module (2) to the roof ring.
Lower and remove the sunroof module assembly out through the passenger side door.
10. If you are replacing the sunroof module assembly, remove the sunroof motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended
Cab) (See: Sunroof / Moonroof Motor/Service and Repair/Sunroof Motor/Actuator Replacement (Extended Cab))Sunroof Motor/Actuator
Replacement (Crew Cab) (See: Sunroof / Moonroof Motor/Service and Repair/Sunroof Motor/Actuator Replacement (Crew Cab)).
Installation Procedure
1. If you are replacing the sunroof module assembly, install the sunroof motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended
Cab) (See: Sunroof / Moonroof Motor/Service and Repair/Sunroof Motor/Actuator Replacement (Extended Cab))Sunroof Motor/Actuator
Replacement (Crew Cab) (See: Sunroof / Moonroof Motor/Service and Repair/Sunroof Motor/Actuator Replacement (Crew Cab)).
