Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
7. Insert a pin (1) in the holes to hold the position while installing the drive motor.
Note: Both mechanisms should now be in the closed position.
8. Repeat this procedure for the opposite side.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Install the sunroof window. Refer to Sunroof Window Replacement (Extended Cab) (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof
Window Replacement (Extended Cab))Sunroof Window Replacement (Crew Cab) (See: Sunroof / Moonroof Panel/Service and Repair/Sunroof
Window Replacement (Crew Cab)).
Tighten the screws to 4 Nm (35 lb in).
2. Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended Cab) (See: Sunroof / Moonroof Motor/Service and
Repair/Sunroof Motor/Actuator Replacement (Extended Cab))Sunroof Motor/Actuator Replacement (Crew Cab) (See: Sunroof / Moonroof
Motor/Service and Repair/Sunroof Motor/Actuator Replacement (Crew Cab)).
Tighten the motor attachment screws to 3.5 Nm (31 lb in).
3. Connect the electrical connector to the motor/actuator.
