Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
4. Connect the left rear park brake cable (1) to the intermediate cable equalizer bar (2).
5. Insert the park brake cable conduit (3) into the frame bracket.
Ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.
6. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling (See: Procedures/Parking Brake Cable Adjuster
Enabling).
7. Adjust the park brake. Refer to Parking Brake Adjustment (1500 Drum Brake) ()Parking Brake Adjustment (1500 Disc Brake) ()Parking Brake
Adjustment (2500/3500 SRW) (See: Adjustments)Parking Brake Adjustment (3500 DRW) ().
Parking Brake Rear Cable Replacement - Left Side (JH6, JH7)
Parking Brake Rear Cable Replacement - Left Side (JH6, JH7)
Removal Procedure
1. Release the park brake.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable
