Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
5. Install the water pump inlet pipe bolts.
Tighten the bolts to 21 Nm (15 lb ft).
6. Install the fuel line bracket bolt at the thermostat housing crossover.
Tighten the bolt to 21 Nm (15 lb ft).
5. Install the water pump inlet pipe bolts.
Tighten the bolts to 21 Nm (15 lb ft).
6. Install the fuel line bracket bolt at the thermostat housing crossover.
Tighten the bolt to 21 Nm (15 lb ft).