Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
7. Install the turbocharger coolant return pipe hose.
8. Position the turbocharger coolant return pipe hose clamp.
9. Install the wiring harness bracket and bolts to the thermostat housing.
Tighten the bolts to 10 Nm (89 lb in).
10. Install the cooling fan pulley. Refer to Fan Pulley Replacement (See: Radiator Cooling Fan/Service and Repair).
11. Install the power steering pump bracket. Refer to Air Conditioning (A/C) Compressor and Power Steering Pump Bracket Replacement (See:
Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Accessory Bracket/Service and Repair).
12. Reposition the power steering pump and install the power steering pump bolts. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and
6.2L) (See: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair)Power Steering Pump Replacement
(4.3L) (See: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair)Power Steering Pump Replacement
(6.6L) (See: Steering and Suspension/Steering/Power Steering/Power Steering Pump/Service and Repair).