Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
13. Connect the main engine electrical harness connectors.
14. Push down on the latches (1) in order to connect the connectors.
15. Close the harness clip (2).
16. Install the wiring harness bracket and bolts to the thermostat housing.
Tighten the bolts to 10 Nm (89 lb in).
17. Install the turbocharger coolant bypass valve. Refer to Turbocharger Coolant Bypass Valve Replacement (See: Powertrain Management/Fuel
Delivery and Air Induction/Turbocharger/Service and Repair/Turbocharger Coolant Bypass Valve Replacement).
18. Install the radiator inlet hose. Refer to Radiator Inlet Hose Replacement (Non-HP2) (See: Radiator Hose)Radiator Inlet Hose Replacement
(Diesel) (See: Radiator Hose).
