Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Fan Shroud: Service and Repair
Engine Coolant Fan Lower Shroud Replacement (Mechanical)
Engine Coolant Fan Lower Shroud Replacement (Mechanical)
Removal Procedure
1. Remove the radiator. Refer to Radiator Replacement (LMM) (See: Radiator/Service and Repair/Removal and Replacement)Radiator
Replacement (4.3L, 4.8L, 5.3L, and 6.0L) (See: Radiator/Service and Repair/Removal and Replacement).
2. Disengage the two clips from the radiator.
3. If equipped with engine oil cooler , remove the oil cooler hose clip from the lower fan shroud.
4. Remove the shroud from the vehicle.
Installation Procedure
1. Install the lower fan shroud and ensure it is centered over lower radiator support.
2. Engage the two clips from the radiator.
3. If equipped with the engine oil cooler , Install the oil cooler hose clip to the lower fan shroud.
4. Install the radiator. Refer to Radiator Replacement (LMM) (See: Radiator/Service and Repair/Removal and Replacement)Radiator Replacement
(4.3L, 4.8L, 5.3L, and 6.0L) (See: Radiator/Service and Repair/Removal and Replacement).
