Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
7. Install the turbocharger coolant outlet hose to the bypass pipe.
8. Position the hose clamp at the bypass pipe.
9. Install the cooling fan clutch. Refer to Fan Clutch Replacement (Diesel) (See: Radiator Cooling Fan/Fan Clutch/Service and Repair).
10. Install the EGR cooler assembly. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (See: Powertrain Management/Emission Control
Systems/Exhaust Gas Recirculation/EGR Cooler/Service and Repair/Exhaust Gas Recirculation Valve Cooler Replacement).
11. Install the generator mounting bracket. Refer to Generator Bracket Replacement (V6) (See: Starting and Charging/Charging
System/Alternator/Service and Repair)Generator Bracket Replacement (6.6L) (See: Starting and Charging/Charging System/Alternator/Service
and Repair)Generator Bracket Replacement (V8) (See: Starting and Charging/Charging System/Alternator/Service and Repair).
12. Install the turbocharger coolant inlet pipe. Refer to Turbocharger Coolant Hoses/Pipes Replacement (LMM Outlet Pipe) .
