Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Water Pump: Service and Repair
Water Pump Replacement (LMM)
Removal Procedure
1. Remove the left wheelhouse inner panel. Refer to Front Wheelhouse Liner Replacement - Left Side (Chevrolet) (See: Body and
Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Left Side)Front Wheelhouse Liner
Replacement - Left Side (GMC) (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner
Replacement - Left Side).
2. Remove the thermostat housing crossover. Refer to Thermostat Housing Crossover Replacement (LMM) (See: Coolant Line/Hose/Service and
Repair/Thermostat Housing Crossover Replacement).
3. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement (See: Engine/Cylinder Block Assembly/Harmonic Balancer -
Crankshaft Pulley/Service and Repair).
4. Remove the water pump to engine coolant pipe nuts.
5. Remove the engine wiring harness retainer from the inner stud.