Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
lost.
4. Remove the oil pump drive gear and crankshaft sensor reluctor.
5. Remove the camshaft reluctor screws.
6. Remove the camshaft reluctor.
7. Clean and inspect the camshaft reluctor for damage. Replace the reluctor if damage is found.
Installation Procedure
1. Position the camshaft reluctor to the camshaft gear.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the camshaft reluctor bolts.
Tighten the bolts to 9 Nm (80 lb in).
