Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement
Removal Procedure
1. Remove the cylinder head. Refer to Cylinder Head Replacement - Left Side (See: Cylinder Head Assembly/Service and Repair/Cylinder Head
Replacement) or Cylinder Head Replacement - Right Side (See: Cylinder Head Assembly/Service and Repair/Cylinder Head Replacement).
2. Loosen the valve lifter guide retainer bolts.
3. Remove the valve lifter guide retainers.
4. Remove the valve lifter guides.
5. Remove the valve lifters.
6. If required, clean and inspect the lifters. Refer to Valve Lifter Cleaning and Inspection (See: Service and Repair/Overhaul/83. Valve Lifters and
Guides Cleaning and Inspection).
Installation Procedure
1. Apply clean engine oil to the roller and outside of the valve lifter.