Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
5. Connect the heater cord to the coolant heater.
6. Remove the right engine mount. Refer to Engine Mount Replacement - Right Side (See: Drive Belts, Mounts, Brackets and Accessories/Engine
Mount/Service and Repair).
7. Install the right front tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Fill the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) (See: Cooling System/Service and Repair)Cooling System
Draining and Filling (Static Fill) (See: Cooling System/Service and Repair).
9. Inspect for coolant leaks.
