Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
4. Install J 44643 in order to hold the flywheel.
5. Remove the lower fan shroud. Refer to Engine Coolant Fan Lower Shroud Replacement (Mechanical) (See: Cooling System/Fan Shroud/Service
and Repair).
6. Remove the crankshaft balancer bolt.
7. Remove the crankshaft balancer.
8. If required, clean and inspect the crankshaft balancer. Refer to Crankshaft Balancer Cleaning and Inspection (See: Service and
Repair/Overhaul/19. Crankshaft Balancer Cleaning and Inspection).
Installation Procedure