Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Lubricate the crankshaft balancer internal hub with clean engine oil.
2. Install the crankshaft balancer on the crankshaft.
3. Lubricate the crankshaft balancer bolt with clean engine oil.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the crankshaft balancer bolt and washer.
1. Tighten the bolt a first pass to 100 Nm (74 lb ft).
2. Tighten the bolt a second pass an additional 105 degrees.
5. Remove J 44643 .