Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
6. Position the starter motor.
7. Install the starter motor bolts and tighten to 78 Nm (58 lb ft).
8. Install the right wheelhouse panel. Refer to Front Wheelhouse Liner Replacement - Right Side (Chevrolet) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side)Front Wheelhouse Liner Replacement - Right
Side (GMC) (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right
Side).
9. Install the lower fan shroud. Refer to Engine Coolant Fan Lower Shroud Replacement (Mechanical) (See: Cooling System/Fan Shroud/Service
and Repair).
10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (See:
Starting and Charging/Battery/Battery Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary
Battery) (See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair).