Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
7. Install the auxiliary generator, if equipped. Refer to Auxiliary Generator Replacement (6.6L) (See: Starting and Charging/Charging
System/Alternator/Service and Repair/Auxiliary Generator Replacement (6.6L)).
8. Install the PCV hose/pipe. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See: Powertrain Management/Emission
Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair).
9. Install the main electrical connector harness bracket (2).
10. Install the main electrical connector harness bracket bolts (1).
Tighten the bolts to 21 Nm (15 lb ft).
11. Clip the main engine electrical harness connectors to the main electrical connector harness bracket.
