Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner Replacement
Removal Procedure
1. Remove the drive belt. Refer to Drive Belt Replacement (See: Drive Belt/Service and Repair).
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.
Installation Procedure
1. Install the drive belt tensioner. Align the pin with the hole in the generator bracket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the drive belt tensioner bolt.