Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
6. Lower the engine.
7. If 4WD vehicle, remove the chain from the front of the engine.
8. If 4WD vehicle, install the generator mounting bracket and the power steering mount bracket bolt.
Tighten the mounting bracket bolts to 50 Nm (37 lb ft).
9. Install the 3 bolts holding the engine mount to the engine mount frame bracket.
Tighten the engine mount to engine mount frame bracket bolts to 65 Nm (48 lb ft).
10. If RWD vehicle with an automatic transmission, install the bolt for the transmission oil cooler line bracket.
Tighten the transmission oil cooler line bracket bolt to 9 Nm (80 lb in).
11. Install the engine protection shield and bolts.
Tighten the engine protection shield bolts to 20 Nm (15 lb ft).
