Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Engine Mount: Testing and Inspection
Engine Mount Inspection
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the oil pan skid plate.
3. Remove the engine protection shield.
Caution: Refer to Engine Mounting Caution (See: Service Precautions/Engine Mounting Caution).
4. Inspect for loose or missing bolts at the following locations:
*
Engine mount bracket to engine
*
Engine mount frame bracket to frame
*
Engine mount to engine mount bracket
*
Engine mount to engine mount frame bracket
5. Replace missing or loose bolts. Refer to Engine Mechanical Specifications (See: Specifications/Service Limits & General Specifications).