Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator Tube Replacement
Oil Level Indicator Tube Replacement
Removal Procedure
1. Remove the oil level indicator.
2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (V8) (See: Exhaust System/Exhaust Manifold/Service and
Repair)Exhaust Manifold Replacement - Right Side (6.6L) (See: Exhaust System/Exhaust Manifold/Service and Repair)Exhaust Manifold
Replacement - Right Side (V6) (See: Exhaust System/Exhaust Manifold/Service and Repair).
3. Remove the starter motor. Refer to Starter Replacement (V8) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair
)Starter Replacement (V6) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter Replacement (6.6L) (See:
Starting and Charging/Starting System/Starter Motor/Service and Repair).
4. Remove the oil level indicator tube bolt at the indicator tube bracket.
5. Remove the oil level indicator tube and O-ring seals.
6. Remove and discard the O-ring seals.
Installation Procedure