Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
4. Install the oil fill tube bracket.
5. Install the oil filler tube bracket bolts.
Tighten the bolts to 21 Nm (15 lb ft).
6. Install the upper oil fill tube bolt (1).
Tighten the bolts to 21 Nm (15 lb ft).
7. Install the drive belt. Refer to Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair).
8. Install the fan and clutch assembly. Refer to Cooling Fan and Shroud Replacement (Non-HP2) (See: Cooling System/Radiator Cooling
Fan/Service and Repair).
