Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
28. Ensure that the oil pan drain plug (430) is tight.
Tighten the drain plug to 25 Nm (18 lb ft).
29. Install the front differential carrier. Refer to Differential Carrier Assembly Replacement (1500 FWD) (See: Transmission and
Drivetrain/Differential Assembly/Service and Repair)Differential Carrier Assembly Replacement (2500 4WD) (See: Transmission and
Drivetrain/Differential Assembly/Service and Repair).
30. Raise the steering rack in place and install the steering rack bolts.
*
Tighten the left side steering rack bolts to 200 Nm (148 lb ft).
*
Tighten the right side steering rack bolts to 100 Nm (74 lb ft).
31. For 2500 series vehicles, position the oil pan skid plate and tighten until snug the 2 rear oil pan skid plate bolts, install the 2 front oil pan skid plate
bolts, if equipped.
Tighten the bolts to 28 Nm (21 lb ft).
