Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
10. Remove the engine front cover bolts.
11. Separate the engine front cover from the cylinder block and upper oil pan using J 37228 .
Note: Do not bend the turbocharger coolant pipe.
12. Remove the engine front cover.
13. If necessary, remove the pressure relief valve O-ring.
14. Clean and inspect the front cover. Refer to Engine Front Cover Cleaning and Inspection (See: Service and Repair/Overhaul/44. Engine Front
Cover Cleaning and Inspection).
Installation Procedure
