Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
5. Route the turbocharger control solenoid valve wiring harness extension into position.
6. Install the engine wiring harness clip (1) to the bracket on the turbocharger.
7. Connect the engine wiring harness electrical connector to the turbocharger control solenoid valve.
8. Install the PCV hose/pipe to the air intake pipe. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (See: Powertrain
Management/Emission Control Systems/Positive Crankcase Ventilation/PCV Valve Hose/Service and Repair).
9. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Air Cleaner Outlet Duct Replacement).
10. Install the water outlet tube. Refer to Water Outlet Tube Replacement (LU3) (See: Cooling System/Coolant Outlet/Service and Repair)Water
Outlet Tube Replacement (LMM) (See: Cooling System/Coolant Outlet/Service and Repair).
