Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement - Left SIde
Exhaust Manifold Replacement - Left Side (6.6L)
Removal Procedure
1. Remove the charge air cooler inlet pipe. Refer to Charge Air Cooler Inlet Pipe Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet Pipe Replacement).
2. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side (Chevrolet) (See: Body and Frame/Fender/Front
Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side)Front Wheelhouse Liner Replacement - Right
Side (GMC) (See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right
Side).
3. Perform the following steps working through the wheelhouse opening.
4. Remove the steering coupling nut (1) and bolt (2) at the upper intermediate steering shaft.
5. Separate the steering shaft coupling from the intermediate shaft.
