Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
3. Install any necessary exhaust muffler insulators that were separated from the muffler.
4. Using the transmission jack, raise the transmission slightly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the exhaust manifold pipe to exhaust manifold nuts and tighten to 50 Nm (37 lb ft).
6. Install the exhaust muffler to exhaust manifold pipe nuts (1) and tighten to 45 Nm (33 lb ft).
