Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
4. Position the exhaust pipe with a NEW gasket (1) to the exhaust manifold. Align the tabs (2) on the gasket to face outward.
Important: Position the exhaust pipe gaskets with the tabs shown. Failure to do so will cause improper alignment of the gaskets and result
in exhaust leaks.
5. Loosely install the exhaust pipe to exhaust manifold bolts.
Left
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Tighten the exhaust pipe bolts in the sequence shown to 53 Nm (39 lb ft).
